Téma: Vymazani "service" RST 1000 Futura
hrbx
offline
3/9
Bernov
3/9
Bernov
Nevíte náhodou někdo, jak se vymaže nápis "SERVICE" na prístrojovce futury. Mělo by to jít kombinací tlačítek, ale jakých??? 
Laďa.s
Smazany
offline
83/9589
Zbýšov
offline
83/9589
Zbýšov
CTRL + ALT + DEL 
BlackSabbath
offline
30/15889
Brno-Brno Město
30/15889
Brno-Brno Město
DavidTLR
Smazany
offline
41/658
Kuřim
offline
41/658
Kuřim
PremeT_woe
offline
20/9794
Přeštice
20/9794
Přeštice
1 reakcí na tento příspěvek Vymazani "service" RST 1000 Futura
zkus držet R+LAP (to je to tlačítko na levým řídítku, kterým tzv. světelná houkačka)
edit: jinak se zkus podívat sem rsv.wz.cz
Naposledy editováno 13.02.2009 09:29:37
edit: jinak se zkus podívat sem rsv.wz.cz
Naposledy editováno 13.02.2009 09:29:37
hrbx
offline
3/9
Bernov
3/9
Bernov
hrbx
offline
3/9
Bernov
3/9
Bernov
1 reakcí na tento příspěvek Vymazani "service" RST 1000 Futura
Tak bohuzel futura nema tlacitko R, u RSV je tento krok popsan i v manualu, zatimco u futury jsem to nenasel. Ma s tim nekdo skusenost??
Ales1200DCT
offline
16/149
Ostopovice
16/149
Ostopovice
hrbx
offline
3/9
Bernov
3/9
Bernov
Konečně sem to našel, pro zájemce, se to dela takto:
1. Remove the seat.
2. On the right hand side (as you face the bars) near the battery you will find two connectors. One each, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later.
3. Turn on the ignition (don't start the engine).
4. On the right hand instrument panel, "EFI" will now display above the MODE button.
5. Press and hold the MODE button.
6. While still pressing the MODE button, press and hold the SET button.
7. Keep both buttons pressed until the "Service" indicator disappears (seems like a long time, 10+ seconds).
8. Turn off the ignition.
9. Disconnect the diagnostic connectors and place them in their original position.
10. Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally.
11. Replace seat and ride safely.
1. Remove the seat.
2. On the right hand side (as you face the bars) near the battery you will find two connectors. One each, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later.
3. Turn on the ignition (don't start the engine).
4. On the right hand instrument panel, "EFI" will now display above the MODE button.
5. Press and hold the MODE button.
6. While still pressing the MODE button, press and hold the SET button.
7. Keep both buttons pressed until the "Service" indicator disappears (seems like a long time, 10+ seconds).
8. Turn off the ignition.
9. Disconnect the diagnostic connectors and place them in their original position.
10. Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally.
11. Replace seat and ride safely.
bahnak2V
offline
4/185
Praha 10-Strašnice
4/185
Praha 10-Strašnice
1 reakcí na tento příspěvek Vymazani "service" RST 1000 Futura
Cau, to ji asi nemáš dlouho, když to řešíš poprvé...Dej sem fotku at se pokocháme...
hrbx
offline
3/9
Bernov
3/9
Bernov
1 reakcí na tento příspěvek (reakce na) Vymazani "service" RST 1000 Futura
bahnak2V> OK, fotka je v profilu, tak drbejte :)
bahnak2V
offline
4/185
Praha 10-Strašnice
4/185
Praha 10-Strašnice
Pro vložení příspěvku se musíte přihlásit nebo registrovat.
